my Yamaha RD350LC

Problems with the RD? Please post.

Moderatoren: solo, Kilroy, Stefan Philipp (M)

Benutzeravatar
kenny
Beiträge: 25
Registriert: So 9. Dez 2012, 16:15
Wohnort: Grave,Netherlands

my Yamaha RD350LC

Beitrag von kenny »

Here SHE is Bild

regards kenny
Benutzeravatar
kenny
Beiträge: 25
Registriert: So 9. Dez 2012, 16:15
Wohnort: Grave,Netherlands

Beitrag von kenny »

I have just move to the Netherlands

Bild

Bild
BildBild
Benutzeravatar
kenny
Beiträge: 25
Registriert: So 9. Dez 2012, 16:15
Wohnort: Grave,Netherlands

Beitrag von kenny »

Bild

And this was the 1st start up in 10 years :)
2nd kick life



Bild
Benutzeravatar
Kilroy
Site Admin
Beiträge: 8690
Registriert: So 20. Jun 2010, 12:03
Wohnort: Mönchengladbach
Germany

Beitrag von Kilroy »

Hi Kenny
Welcome here to the german RD community.
A very nice bike. Did you make the belly pan yourself?
Where in the Netherlands you are living?

Kind regards
Uwe
Mit einem Gruß aus dem Westen
*** Ein richtiges Motorrad braucht nur 2 Ventile. Eins am Vorder- und eins am Hinterrad. ***

Bild
Benutzeravatar
kenny
Beiträge: 25
Registriert: So 9. Dez 2012, 16:15
Wohnort: Grave,Netherlands

Beitrag von kenny »

Thank you Uwe i am in again :)
Benutzeravatar
kenny
Beiträge: 25
Registriert: So 9. Dez 2012, 16:15
Wohnort: Grave,Netherlands

Beitrag von kenny »

But if i click on smiles it says HACKING attempt ?
Benutzeravatar
kenny
Beiträge: 25
Registriert: So 9. Dez 2012, 16:15
Wohnort: Grave,Netherlands

Beitrag von kenny »

Hi everyone this is one of my bikes i also have a Suzuki TL1000s its a mad thing also :lol

Bild

Bild

lots of trick parts in carbon :)
Benutzeravatar
Kilroy
Site Admin
Beiträge: 8690
Registriert: So 20. Jun 2010, 12:03
Wohnort: Mönchengladbach
Germany

Beitrag von Kilroy »

But if i click on smiles it says HACKING attempt ?
Dont care about that. Either use the full editor or write the smileys manually :-)
Regards
Uwe
Mit einem Gruß aus dem Westen
*** Ein richtiges Motorrad braucht nur 2 Ventile. Eins am Vorder- und eins am Hinterrad. ***

Bild
Benutzeravatar
kenny
Beiträge: 25
Registriert: So 9. Dez 2012, 16:15
Wohnort: Grave,Netherlands

Beitrag von kenny »

So back to the Lc(elsie) She is a 1981 but she is a 250with a 350 engine but
that does not bother me at all I LOVE MY BIKE :)

I have owned the bike since 2000 and still have my 250 engine .

The Carbon belly pan was made by ZERO-LIMITS.co.uk its a copy of an ARMTRONG RACING BELLY PAN

Bild

its NOT a YPVS belly pan.
Bild
REgards kenny
Benutzeravatar
kenny
Beiträge: 25
Registriert: So 9. Dez 2012, 16:15
Wohnort: Grave,Netherlands

Beitrag von kenny »

Lots to do before she goes back on the road next year
list of things to do:)
new tyres . what is best and where to buy in germany or netherlands ?
a rear wheel from a 350LC ?
clean wheels and pray she stays good and runs well :)

Regards kenny
Benutzeravatar
kenny
Beiträge: 25
Registriert: So 9. Dez 2012, 16:15
Wohnort: Grave,Netherlands

Beitrag von kenny »

O and get a new set of clock faces from YAM BITS in KMH .
Benutzeravatar
einzweitakter
Beiträge: 357
Registriert: Mo 3. Sep 2012, 20:26
Wohnort: Kordel

Beitrag von einzweitakter »

Hi Kenny,

nice bikes in a very good condition! :?

Best regards

Klaus
RDfahrniswiewenndefliechs
Benutzeravatar
kenny
Beiträge: 25
Registriert: So 9. Dez 2012, 16:15
Wohnort: Grave,Netherlands

Beitrag von kenny »

Hi Klaus thank you :)

What bikes do you have ?
i see the Honda but what about 2 strokes ?

Regards kenny
Benutzeravatar
einzweitakter
Beiträge: 357
Registriert: Mo 3. Sep 2012, 20:26
Wohnort: Kordel

Beitrag von einzweitakter »

Certainly i have 2-strokes, too!!!!!! :)

Look at "persönliche Gallerie" in my Profile.

Klaus
RDfahrniswiewenndefliechs
Benutzeravatar
Kilroy
Site Admin
Beiträge: 8690
Registriert: So 20. Jun 2010, 12:03
Wohnort: Mönchengladbach
Germany

Beitrag von Kilroy »

Hello Kenny
Best tire for the RD's is the Bridgestone BT45.
You might check a local dealer or an internet dealer. I always get mine directly at my Yamaha garage for a resonable price including assembly and disposal of the old tire.
Regards Uwe
Mit einem Gruß aus dem Westen
*** Ein richtiges Motorrad braucht nur 2 Ventile. Eins am Vorder- und eins am Hinterrad. ***

Bild
Antworten