Hello everyone!
Mein Deutsch war nie so toll und ich habe seit langem nur english benutzt so ich dachte ich wurde diesesmal euch sparen...
I have an old pair of 31w carburators that I took apart while working on the not-restricted carbs that are used.
I may have in my youth some 10 yrs ago changed better looking parts into the carbs in use from these 31w carbs. The bike runs rich without real power and I'm worrying if I've mixed something up.
My 31w's have odd main jets
5k1 needles (as the real carbs)
345 needle jets (as the real carbs)
22,5 pilot jets (as the real carbs)
and 2.0 cutaway slides (as the real carbs)
Is it true that the needles, needle jets, pilots and slides are identical and the restriction is in the carb body?
How are 31w carbs restricted?
Moderatoren: solo, Kilroy, Stefan Philipp (M)
Hi Mikotus,
have a look to this site:
http://www.rd350lc.net/pageBRIDAGE.htm
It describes the restricted versions.
Below you see the setting for the 59 HP version
best regards
wiba
[schild=standard fontcolor=000000 shadowcolor=C0C0C0 shieldshadow=1]tuneup[/schild]
have a look to this site:
http://www.rd350lc.net/pageBRIDAGE.htm
It describes the restricted versions.
Below you see the setting for the 59 HP version
best regards
wiba
[schild=standard fontcolor=000000 shadowcolor=C0C0C0 shieldshadow=1]tuneup[/schild]
- Dateianhänge
-
- 31K.jpg (37.85 KiB) 1094 mal betrachtet